Home page

Service outlets

Service process

Service products

Q&A

Examination vehicle, ball tube and image intensifier deviate up and down

1. Check the microswitch on the side of the frame of the ball tube and image intensifier 2. Open the electrical control cabinet to check whether the wire ends are loose

The CK312A host reports error 5

1. Check whether the 125v/10A insurance in the insurance works normally 2. Check whether the filament plate works normally

UC arm crossarm cannot be up or down or rotated

1. Enter the program and check whether it can work in the program 2. If it can work in the program, it is necessary to reset the motion parameters 3, if in the program can not work, remove the case to check the insurance on the machine

The DR Enters the DROC software and reports License node restriction does not match client,s node for product DROC work in DEMO mode.

Go to drive C and open the DROC folder to look for the watch Dog Detelt file. Open the file and click Evalvetioninfo to check the time limit and contact our technical staff

The DR Message "panel initialization failed, please check if configuration is correct" is displayed.

Possible causes: 1. Check whether the plate is energized 2. Check whether the network connection between the tablet and the computer host is properly connected

< 1 >

Navigation

About us
Products
Service
News
Join us
Contact us

Products

Medical imaging
Physical examination
Mobile medical

Tel：86-22-22101689
E-mail：sales@orich.com.cn
Add：No.16 Cuiming Road, YAT-SEN Scientific Industrial Park, Tianjin Economic Technological Development Area, Tianjin, China 301726

Focus on

WeChat

Orich medical equipment （Tianjin）Co.,Ltd.

SEO